[Know] Yunnan | the polysulfide construction sealant supplier - Hebei | the polysulfide construction sealant plant construction methods: 
 Buildings must be kept clean and free of grease. 
 2, in the construction should be preceded by the gap on both sides of adhesive protective tape to prevent excess glue in the construction of the structure surface dirty. 
 3, the white material (group A) to react with atmospheric moisture, not long exposed to the air. The main agent and curing agent for silicone sealants full uniform mixing ratio of 1:1, until no color. Are free to change the ratio according to the different users of climate temperature (curing agent summer less in winter), use should be based on a small test. 
 4, the silicone rubber mixing well with a gray knife or squeeze the glue gun to fill compacted fill within the seam, and then squeegee the glue evenness. 
 Shi Ping plastic protective tape can be removed, water will rain within 24 hours should be avoided. (≤ 24 hours of dry time, seven days before irrigation test performance of all of 28 days.) 
 6, prepared from silicone rubber should be used up within two hours, otherwise they will be cream slowly curing caused by construction difficulties, to avoid waste. 
 Address: Hong Thai Street, Development Zone, Hengshui City, on the 8th 
 Tel :400-0318-993 
 Fax :0318-7108181 
 Phone: 15603189993 

 13012098388 
 E-mail: 13012098388@sohu.com 
 Web site: http://www.hszs.org