Supply sealant production line in Henan two-component polysulfide sealant production equipment 

 Sealant (paste) generic name: two-component silicone sealant, TR construction sealant, silicone building sealant (paste) 
 Features: good adhesive properties for a wide range of temperature, neutral cure non-toxic and non-corrosive. After curing has excellent weathering characteristics and excellent UV resistance, high temperature resistance, corrosion resistance and temperature performance. Neutral dealcoholized at room temperature curing, curing agent to solidify the magnitude of the temperature changes can also be adjusted. 
 -30 ℃ to 120 ℃, the typical physical properties to form excellent structural strength. Applications: 
 The product is used in the connection of the civil construction industry, transport, concrete precast building materials and construction-fill-seal joints. Senior roads, bridges, runways, underground pipes, joints for connecting and sealing as well as tunnels and buildings, expansion joints and deformation joint. 
 Physical properties: 
 Method of application: 
 Buildings must be kept clean and free of grease. 
 2, in the construction should be preceded by the gap on both sides of adhesive protective tape to prevent excess glue in the construction of the structure surface dirty. 
 3, the white material (group A) to react with atmospheric moisture, not long exposed to the air. The main agent and curing agent for silicone sealants full uniform mixing ratio of 1:1, until no color. Are free to change the ratio according to the different users of climate temperature (curing agent summer less in winter), use should be based on a small test. 
 4, the silicone rubber mixing well with a gray knife or squeeze the glue gun to fill compacted fill within the seam, and then squeegee the glue evenness. 
 Shi Ping plastic protective tape can be removed, water will rain within 24 hours should be avoided. (≤ 24 hours of dry time, seven days before irrigation test performance of all of 28 days.) 
 6, prepared from silicone rubber should be used up within two hours, otherwise they will be cream slowly curing caused by construction difficulties, to avoid waste. 



 Address: Hong Thai Street, Development Zone, Hengshui City, on the 8th 
 Tel :400-0318-993 
 Fax :0318-7108181 
 Phone: 15603189993 

 13012098388 
 E-mail: 13012098388@sohu.com 
 Web site: http://www.hszs.org